Valid Entries
1 = Assigned ✔
2 = Not Assigned
3 = Select Button (then press a line button to assign the line to that button)
Programming
To assign lines to a specific extension:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 0 ] [ 1 ]. The
display reads:
LineAssign
Extension:
2.Enter the extension number to be programmed
A red light appears next to each line button that has a line assigned. To remove all existing line assignments, press [ Remove ] before selecting a line. After this point, pressing [ Remove ] removes only the specified line.
3.Enter the line number
4.At this point:
■If you want to assign the line to the first available button with lights on the system phone, press [ Next Data ] until the display reads:
LineAssign 15 L01
1Assigned
■If you want to remove a line assignment, press [ Next Data ] until the display reads:
LineAssign 15 L01
2Not Assigned
■If you want to assign the line to a specific button, press [ 3 ]. The display reads:
Line Assign 15 L01
3Select Button
Then press a line button to assign the line to that button. If you use option 3 after a line has been assigned, the line moves from the old button to the new button you select.
5.At this point:
■To program another line for this extension, press [ Next Item ] or [ Prev Item ] until the correct line number shows on the display. Then repeat Step 4.
■To program another extension, press [ Next Procedure ] [ Prev Procedure ] and begin at Step 2.
6.Select another procedure or exit programming mode.
Line Assignment (#301) |
