Programming
To program Personal Speed Dial numbers:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.Dial the number of the extension to be programmed with this feature.
3.Assign a
between 80 and 99. For example, to assign code 81, press [ Feature ] [ 8 ] [ 1 ].
If a number is already assigned to the code, it appears on the display. If no number is assigned to the code, the display reads:
Blank
4.Enter the phone number exactly as you would dial it.
5.At this point:
■To program another Personal Speed Dial number, start from Step 3.
■To program over an existing number, enter the new number after selecting the
■To remove a Personal Speed Dial number, enter the number’s
6.Continue programming or exit programming mode.
Using
System Phone
You can lift the handset or press [ Spkr ] before dialing:
1. If you want to call on a specific line, press the line button (or press [ Intercom ] [ 8 ] and the
2.Press [ Feature ].
3.Dial the
If you did not specify an outside line, the system automatically selects one, turns on the speaker if the handset is in the cradle, and dials the number. The number being dialed shows on a display phone.
Standard Phone
You can dial Personal Speed Dial numbers on a standard phone, but the numbers must be programmed from extension 10 or 11. To dial a programmed Personal Speed Dial number:
1.Lift the handset.
You hear intercom dial tone.
2.Press [ # ].
3.Dial the
The system automatically selects an outside line and dials the number.
