Automatic Extension Privacy (#304)
Description
This System Programming procedure lets you either allow users to join active calls at an extension or prevent users from joining active calls at an extension. When Automatic Extension Privacy is Assigned for an extension, other users cannot join active calls at that extension. This feature is typically used for standard phones and extensions connected to fax machines, modems, and credit card scanners, which make and receive data calls that should not be interrupted.
Related Features
■To manually change an extension’s Privacy state, users can program the Privacy feature on a button with lights. Users can then press the Privacy button to activate the feature (green light on) or deactivate the feature (green light off) when they want someone to join a call at their extension. (If Automatic Extension Privacy is Assigned at an extension, the green light is lit automatically after programming the Privacy button to indicate that Privacy is currently active. If this is the case, and the Privacy button is pressed, the feature is deactivated. To activate Privacy again, you must press the button.)
■This feature applies only to active calls. Any user can retrieve a held call unless Exclusive Hold is used.
Considerations
■If you want to be able to intercept calls routed to an auxiliary
■Standard phones and system phones without a programmed Privacy button cannot override this feature once it is assigned to an extension.
Valid Entries
1 = Assigned
2 = Not Assigned ✔
Programming
To change the Automatic Extension Privacy setting for an extension:
1 . | Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 0 ] [ 4 ]. | ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 . | Enter the number of the extension to be programmed. For example, to | ||||||||||||||||
| program extension 16, press [ 1 ] [ 6 ]. | ||||||||||||||||
|
|
|
|
|
| ||||||||||||
3 . | To assign or unassign Automatic Extension Privacy, press [ Next Data ] until the | ||||||||||||||||
| appropriate value displays. | ||||||||||||||||
4 . | To program another extension, press [ Next Item ] or [ Prev Item ] until the extension | ||||||||||||||||
| number shows on the display. Then repeat Step 3. | ||||||||||||||||
5 . | Select another procedure or exit programming mode. | ||||||||||||||||
