Copy Settings (#399)
Description
This System Programming procedure copies all of the following settings from one extension to another:
#301 Line Assignment | #401 Outgoing Call Restriction |
#302 Line Access Restriction | #405 Disallowed List Assignments |
#303 Display Language | #408 Allowed List Assignments |
#304 Automatic Extension Privacy | #501 Pickup Group Extensions |
#305 Abbreviated Ringing | #502 Calling Group Extensions |
#307 Forced Account Code Entry | #504 Night Service Group |
#308 Distinctive Ring | #505 Hunt Group Extensions |
#309 Intercom Dial Tone | #601 Fax Machine Extensions |
#310 Automatic VMS Cover | #607 AA Extensions |
#311 Emergency Telephone | Automatic Line Selection |
#312 Voice Announce On Busy | Line Ringing |
Considerations
■This procedure is skipped in the sequence of programming procedures when cycling. To use this procedure, enter the code (#399) directly.
■For each type of phone, program one extension and then use this procedure to copy the programming from that extension to the others with the same number of line buttons (for example, from an
Programming
To copy the programmed settings of one extension to another of the same type:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 9 ] [ 9 ].
2.At the Extension: prompt, enter the extension to copy from. For example,
to copy the current settings for extension 18, press [ 1 ] [ 8 ].
3.At the Data
4.At this point:
■To copy the same settings to another extension, enter the new extension number.
■To copy another extension’s settings, press [ Next Item ] or [ Prev Item ] until the extension number shows on the display. Then repeat Step 3.
5.Select another procedure or exit programming mode.
Copy Settings (#399)
