Nikon COOLPIXP510RED, COOLPIXP510BLK manual Backlighting

Shooting Features

Scene Mode (Shooting Suited to Scenes)

oBacklighting

Use when light is coming from behind the subject, throwing features or details into shadow. Press the dbutton to set HDR (high dynamic range) compositing using the HDR setting.

•When HDR is set to Off (default setting): The flash fires to prevent the backlit subject from being hidden in shadow.

-Shoot pictures with the flash raised.

-The camera focuses at the center area of the frame.

-Press the shutter-release button all the way to shoot a single picture.

•When HDR is set to Level 1-Level 3: Use when taking pictures with very bright and dark areas in the same frame. Select Level 1 when there is less difference between bright and dark areas, and Level 3 when there is more difference between bright and dark areas.

-The Picon is displayed on the shooting screen.

-The camera focuses at the center area of the frame.

-When the shutter-release button is pressed all the way,

the camera shoots pictures continuously and saves the following two images.

-Non-HDR composite image

-HDR composite image (loss of detail is reduced in highlights and shadows)

-The second image saved is an HDR composite image. If there is only enough memory to save one image, an image processed by D-Lighting (A88) at the time of shooting, in which dark areas of the image are corrected, is the only image saved.

-Once the shutter-release button is pressed all the way, hold the camera steady without moving it until a still picture is displayed. After taking a picture, do not turn the camera off before the monitor switches to the shooting screen.

-The angle of view (i.e., the area visible in the frame) seen in the saved image will be narrower than that seen on the monitor at the time of shooting.

-Depending on the shooting conditions, dark shadows may appear around bright subjects and bright areas may appear around dark subjects. You can compensate by lowering the level setting.

-Use of a tripod is recommended. Set Vibration reduction in the setup menu (A108) to Off when using a tripod to stabilize the camera.

44