Kompernass KH 6509, KH 6508 Faults and how they can be remedied, Fault Possible cause/Remedy

Models: KH 6509 KH 6508

1 66
Download 66 pages 53.16 Kb
Page 58
Image 58

16. Faults and how they can be remedied

Fault

Possible cause/Remedy

The display is blank/ DVD

A

Check that the power cable has been correctly plugged into a mains socket.

Player does not indicate

B

 

any function even though

Check whether the mains socket is conducting power by connecting another

it has been switched on

 

electrical appliance to the same mains socket.

 

C

Switch off the DVD Player by pressing the “Power” button on the front panel,

 

 

and wait for ten seconds. Then switch the DVD Player on again by pressing the

 

 

“Power” button.

 

 

 

Display indicated “No

A

The disc is dirty, scratched or damaged. Clean the disc or load another disc.

Disc“, even though a disc

B

 

has been loaded

The country/regional code of the loaded DVD/VCD/S-VCD does not match the

 

 

regional/country code of the DVD Player. In this case the DVD/VCD/S-VCD can-

 

 

not by played on the DVD Player.

 

 

 

The loaded disc won’t play A condensation film may have formed on the laser scanning lens of the DVD Player. This is very likely if the DVD Player has been exposed to extreme temperature fluc- tuations. Place the DVD Player in a dry environment at normal room temperature.

 

Remove the disc from the disc drawer. Leave the DVD Player switched on for at least

 

one hour without using it to allow the condensation film to evaporate.

 

 

 

No picture or only a black-

A

Check that all the connecting cables between the DVD Player and television (or

and-white picture

 

video projector) have been firmly plugged into the correct sockets.

 

B

Check that the settings in the OSD menu match the manner of connection of the

 

 

DVD Player with the television (or video projector)

 

For this subject please refer to Chapter 6. “Connecting the DVD Player to a Televi-

 

 

sion”

 

C

Refer to the operating instructions for the given television (or video projector) to

 

 

check that all the settings have been made on the television that are necessary

 

 

to use the DVD Player with the television.

 

 

 

No 4:3 or 16:9 screen for-

A

Refer to the operating instructions for the given television to establish the screen

mat displayed

 

format.

 

B

Check whether the settings in the OSD menu conform with the television’s avail-

 

 

able screen format.

 

 

 

None of the buttons on

A

Switch off the DVD Player by pressing the “Power” button on the front of the DVD

the DVD Player or remote

 

Player. Wait for ten seconds and then press the “Power” button once again to

control function/Other

 

switch the DVD Player on again.

functions

B

 

 

If the faults continue to persist: Reset the works settings for the DVD Player.

 

For this subject please refer to Chapter 17. “General Functions of the DVD Player”.

 

 

 

 Silvercrest KH 6508/KH 6509

Page 58
Image 58
Kompernass KH 6509, KH 6508 operating instructions Faults and how they can be remedied, Fault Possible cause/Remedy