Kompernass KH 6509, KH 6508 .. Exchanging batteries, Connecting the DVD Player to a television

.. Exchanging batteries

The batteries must be exchanged when remote controlled operation of the DVD Player is disrupted or does not func- tion at all.

Always exchange both batteries together to re-establish full power.

Please note:

Spent batteries must not be disposed of in the do- mestic waste. Hand in spent batteries at collecting or special waste-disposal points, or return them to the place where they were purchased.

If you eventually have to dispose of the remote control of the DVD Player, then ensure that the batteries are removed beforehand!

6. Connecting the DVD Player to a television

After having set up the DVD Player it can then be connected to a television. The DVD Player can be connected to televi- sions with the PAL, NTSC and SECAM television standards.

To connect the DVD Player to a television with …

•NTSC standard, then the video settings in the so-called “OSD”menu of the DVD Player must be changed because this is where PAL has been works adjusted as television standard.

•Settings do not have to be changed to use the SECAM standard. The works adjusted settings for the PAL standard also enable DVD Player operation with SECAM televisions provided that they can also process PAL signals.

➧For this subject please also refer to Chapter 9.3 “Video Settings: Setting Video Output ”

There are different ways to connect the DVD Player, depend- ing upon the configuration of the given television:

.. Connection to a television with SCART cable/RGB

Please note:

The best connection in terms of quality is when the DVD Player is connected to a television with a SCART cable via the RGB input. Select this connection if the television features an RGB connection. Check the operating instructions for the given television if you are not sure whether or not the television has an RGB input.

Proceed as follows to connect the DVD Player to a televi- sion with a SCART cable …

1Insert the plug of the supplied SCART cable in the“EURO SCART” inscribed socket at the back of the DVD Player.

2Insert the plug on the other end of the SCART cable in the television’s SCART socket.

3Set the television in the AV channel to RGB mode. Refer to the operating instructions of the given television if you are not sure how to set this.

➧For this subject please also refer to Chapter 9.3.“Video Settings: Setting Video Output”.

.. Connection to a television via S-Video

Please note:

For this connection variant, the TV should have an S- Video input and two uncovered chinch sockets. Besi- des, you require an S-video cable and an audio/video chinch cable not included in the delivery contents. These can be obtained from a specialised dealer.

If you are not sure whether or not the television is S-Video capable or has chinch sockets, then please refer to the operating instructions for the given tel- evision.

To connect the DVD Player to the television via S-Video …

Silvercrest KH 6508/KH 6509