Kompernass KH 6508 Returning the DVD Player to the works settings, Switching off the DVD Player

•… on some DVDs/VCDs/S-VCDs with a printed par- ent guidance rating, the child lock will not indicate any function in connection with the set age release rating.

Please note:

Should you have forgotten your password, then you can continue with the works set “8888” password.

Returning the DVD Player to the works settings

If you wish to reverse all the settings you have made in the OSD menu back to the original works settings, then proceed in the following manner …

1In the event that a disc loaded in the DVD Player is cur- rently being played, then terminate this by pressing the “Stop” button on the front of the DVD Player, or on the remote control, once.

2Press the“Setup”button on the remote control to display the OSD menu on the television screen.

3Press the control button to select the“Parental”menu item, and then press the“OK”button on the remote con- trol.

4The“Parental”menu is then displayed with its sub-items …

Password	– – – –
Rating	G
Load factory	Reset

The“Password”menu sub-item is the first to be automati- cally selected.

5Press the control button to select the “Load Factory” menu sub-item. The “Reset” option is then marked.

6Press the “OK” button once.

7The DVD Player is then returned to the works settings. Wait for ten seconds before restarting the DVD Player.

Please note:

Please realise that returning to the works settings will cancel all your previous settings in the OSD menu!

Warning:

A return to the works settings will also change the Stereo Downmix settings. In the event that …

•The DVD Player is connected to a stereo televi- sion and no audio units are connected to the DVD Player, or

•A Dolby Prologic-compatible audio unit has been connected to the stereo output (via a chinch cable and the chinch sockets “FL” and “FR”) of the DVD Player – as described in chapter“Connecting a HiFi system”

…then there will be no sound, or only very soft, dur- ing playback of DVDs, VCDs/SVCDs and audio-CDs, MP3 or WMA CDs, after returning to the works set- tings. In this case the previous speaker settings for Stereo Downmix in the OSD menu,“Audio”menu item, “Size” sub-item, must be returned to the previous settings:

•Front: LARGE

•Center: Off

•Rear: Off

•Subwoofer: Off

➧For this subject please refer to chapter 9.4, “Audio Set- tings: Setting Speaker Sizes – Stereo Downmix”

Switching off the DVD Player

Proceed in the following manner to switch off the DVD Player …

1In the event that a disc loaded in the DVD Player is be- ing played, then terminate this by pressing the “Stop” button on the front of the DVD Player, or on the remote control, twice.

2Open the disc drawer so that a disc loaded in the DVD Player can be removed when the“Open/Close”button on the front of the DVD Player, or on the remote control, is pressed once. Reclose the the disc drawer by pressing the “Open/Close” button once.

3Press the “Standby“ button on the remote control once. The DVD Player will then be switched over to operating readiness or to“Standby mode”. Press the“Standby”but- ton to switch on the DVD Player.

To switch off the DVD Player entirely press the “Power” button on the front of the DVD Player once.

Cleaning the DVD Player

Only use a slightly moist cloth with a mild detergent to clean the case surface of the DVD Player. Ensure that no moisture can enter the DVD Player when it is being cleaned!

Clean the inside of the disc drawer – if necessary – only with a clean, dry brush (e.g. lens brush available from pho-

Silvercrest KH 6508/KH 6509 