Kompernass KH 6508, KH 6509 operating instructions Starting the DVD Player, . Inserting the DVD

9Select the “Rear” option for the rear audio channels of audio components by pressing the control button once.

10Press the “OK” button once to select from the available settings:

•“Large“ if large rear speakers have been connected to the audio component.

Please note:

If the“Small”setting is selected in the“Front”option, then the“Large” setting for the rear speakers can no longer be selected. You can select“Large”for the rear speaker, if the subwoofer is setting “On”.

•“Small“ when small rear speakers are connected to the audio component.

•“Off“ it you want to turn off the audio channels for the rear speakers or when no speakers are connected to the audio component.

Having selected a setting for “Rear”, proceed in the fol- lowing manner:

12Select the“Subwoofer“ option for the subwoofer channel of the audio component by pressing the control button once.

13Press the “OK” button to select between the available settings:

•“On“ if a subwoofer is connected to the audio compo- nent.

•“Off“ to turn off the audio channel for the subwoofer or when no subwoofer has been connected to the audio component.

Please note:

If you have selected the“Small”setting in the“Front” option, then the “Off” setting cannot be selected for the subwoofer.

If the“Off”setting has been selected for the“Center”, “Rear” and “Subwoofer” options, then sound is only reproduced by two channels (stereo). This equals the works setting for Stereo-Downmix.

Having selected for“Subwoofer“, thereby concluding all settings in the “Size” menu sub-item, proceed in the fol- lowing manner:

14Leave the“Audio”menu sub-items by pressing the control button four times.

10. Starting the DVD Player

Having …

•set up the DVD Player at an appropriate point

•connected the DVD Player to the television (or video pro- jector) with one of the listed connecting facilities

•connected the DVD Player (if required) to an HiFi or sur- round-sound system or a Dolby Digital or DTS Receiver

•ensured that the remote control is operational by loading the batteries

•and know how to call and operate the settings menu with the remote control

... then the DVD-Player will be ready to operate

. Inserting the DVD

To play a disc with the DVD player:

1Switch on the television connected to the DVD player.

2Make certain that the DVD player is ready for operation and switched on.

If the television, the DVD-Player and any other possibly co- nected appliances (e.g. an audio component) are ready and on and the DVD-Player is correctly connected to the televi- sion, the Silvercrest logo will appear on the TV screen.

If no disc is inserted in the disc compartment of the DVD- Players: The message„No disc“ apears on the TV screen.

3Open the disc compartment by pressing the button „Open/Close“ on the remote control or the button on the front of the DVD-Player once.“ Open“ will appear on the TV screen.

4Place the disc into the DVD compartment with the writ- ing/label facing up. For twin-sided discs:

The side you would like to play must face down.

5After having inserted the disc: press the button „Open/ Close“ on the remote control or the button on the front of the DVD-Player again to close the disc compartment.

6The contents of the will will now be loaded; this may take a few seconds. In the meantime the message„Loading“ appears on the TV screen.

Silvercrest KH 6508/KH 6509 