Kompernass KH 6508, KH 6509 Single Frame Forward Step, Enlarging the picture Zoom

•Once for half the playback speed (compared to normal playback speed); “ 1/2” is displayed on the television screen.

•Twice for one-fourth of the playback speed; “ 1/4” is displayed on the television screen.

•Three times for one sixth of the playback speed;“1/6”is displayed on the television screen.

•Four times for one seventh of the playback speed;“1/7” is displayed on the television screen.

For slow playback Return press the“S.RWD”button dur- ing playback…

•Once for half the playback speed; “ 1/2” is displayed on the television screen.

•Twice for one-fourth of the playback speed; “ 1/4” is displayed on the television screen.

•Three times for one sixth of the playback speed; “ 1/6” is displayed on the television screen.

•Four times for one seventh of the playback speed;“1/7” is displayed on the television screen.

Please note:

Sound is not reproduced during slow playback.

2To continue film playback at the selected point in normal

speed, press once the“Play” button on the front of the DVD Player or on the remote control“ Play”is once again displayed on the television screen.

Single Frame Forward (Step)

Please note:

This function may not be available on all DVDs/VCDs/ S-VCDs! If you try to carry out a function that is not available, then the symbol is displayed on the tel- evision screen.

Proceed in the following manner to advance a film of a loaded DVD/VCD/S-VCD forward, frame-by-frame …

1Press during play the“Pause/Step” button once to stop play. The still picture of the chapter stopped, is displayed on the television screen.

2The still picture will then be advanced frame-by-frame each time the “Pause/Step” button is depressed.

3To return to film play press once the “Play” button on the front of the DVD Player or on the remote control.

Enlarging the picture (Zoom)

Please note:

This function may not be available on all DVDs/VCDs/ S-VCDs! If you try to carry out a function that is not available, then the symbolis displayed on the tel- evision screen.

While the film on the loaded DVD/VCD/S-VCD is being played it is possible to enlarge the picture on the televi- sion screen in three stages by pressing on the “Zoom” button on the remote control …

•Once for the first enlargement stage; “1” is displayed on the television screen.

•Twice for the second enlargement stage:“2”is displayed on the television screen.

•Three times for the third enlargement stage;“3”is dis- played on the television screen.

To turn off the zoom function and return to a normal picture size, press the “Zoom” button a fourth time; “ Off” is dis- played on the television screen.

Changing the camera angle (Angle)

Please note:

This function may not be available on all DVDs/VCDs/ S-VCDs! If you try to carry out a function that is not available, then the symbolis displayed on the tel- evision screen.

Some films on DVD/VCD/S-VCD contain chapters which were shot at different camera angles. When films contain such chapters then the same chapter can be watched from different angles.

Press the“Angle”button on the remote control while the film of the loaded DVD/VCD/S-VCD is being played; the angle is changed each time the “Angle” button is depressed.

Subtitle fade-in/fade-out

Please note:

This function may not be available on all DVDs/VCDs/ S-VCDs! If you try to carry out a function that is not available, then the symbolis displayed on the tel- evision screen.

If the film of the loaded DVD/VCD/S-VCD has subtitles, then these can be displayed on the television screen by pressing the “Subtitle” button on the remote control.

DVD/VCD/S-VCD

Silvercrest KH 6508/KH 6509 