Kompernass KH 6508 Setting delay center/back, Please Note, Setting EQ mode, Speaker settings

Raw

Set to„Raw“, if you have connected a multi-channel digital audio component, for e.g. a Dolby Digital or DTS receiver or a 5.1 channel surround system to the DVD player via a coaxial cable or optical cable.

PCM

Set to„PCM“, if you have connected a two-channel digital audio component to the DVD player via a coaxial cable or optical cable.

Off

Set “Off” if no digital audio components have been con- nected to the DVD Player.

6Select with the control buttons and between the options“Raw”,“PCM”and“Off”. Press the“OK”button once to confirm the choice.

Setting delay center/back

7By means of the control button select „Center delay“, or„Back delay“ and confirm via„OK“.

8Use the control buttons and to select between the options „0M/0Ft“ ,„0.3M/1Ft“ ,„0.6M/2Ft“ ,„0.9M/3Ft“ ,„1.2M/4Ft“ ,„1.5M/5Ft“ . Press the„OK“ button once, to confirm the selection.

Calculate the distances as follows:

Distance from the center loudspeaker to the listener = dis- tance from the right and left loudspeakers to the listener - distance from the center loudspeaker to the listener

Distance from the right and left rear loudspeakers to the listener=distance from the right and left front loudspeak- ers to the listener-distance from the right and left rear loudspeakers to the listener

Please Note:

In order to activate the menu option „Center delay“, or. Back delay“, „Surround“ must be activated in the menu„Audio“!

Please Note:

Use the menu option„ Pink Noise“ to check the func- tion of the loudspeakers. Press„OK“ to activate the individual loudspeakers„Left“,„Center“,„Right“,“Left Surr“,„Right Surr“ and„Subwoofer“.

If the Surround and Center loudspeakers are deac- tivated in the menu option „Audio“, they cannot be tested with the Pink Noise function.

Setting EQ mode

9Using the control button, select„EQ MODE“ and confirm via„OK“.

10By means of the control button and choose between the options„Pop“,„Rock“,„Live“,„Jazz“,„Classic“. To deactivate EQ mode, select„off“. Confirm via„OK“.

11Press the button „Setup“ a once, to fade out the OSD menu.

Speaker settings

For an optimal sound experience it is necessary to adapt sound reproduction to …

•The connected audio components

•The spatial conditions at the point of installation of the DVD Player/audio components, and

•Your personal preferences.

Please note:

The subsequent steps are only related to the con- nection of a DVD Player to an audio component via analog cables.

If you have opted for a digital connection …

• Connection via a coaxial cable, or optical cable

…then the subsequently described speaker settings do not have to be adjusted on the DVD Player, but rather on the given audio component. Please refer to the operating instructions for the given audio com- ponent to find out how the settings are adjusted on the given component.

Setting speaker sizes

Before changing the speaker settings:

Stereo-Downmix

The speakers have been works adjusted to the so-called “Stereo-Downmix” setting:

Silvercrest KH 6508/KH 6509 