Kompernass KH 6509 Programmed picture display Program,  Silvercrest KH 6508/KH

JPEG

CD-R MENU

ROOT	0	..		0
Folder 1	1		Picture 1	1
		JPG
Folder 2	2		Picture 2	2
		JPG
Mode		Folder Normal

Fig. 2

3One of the modes is displayed with each depression of the “OK” button. When the required display mode is dis- played, then leave the mode select bar by pressing the control button once. The mark is then once again in the picture list.

4If there are no folders:

•Press the“Play”button once to start picture display with the first picture on the CD-R/CD-RW

or

•Press the“OK”button once to start picture display at the currently displayed picture.

If there are folders:

•Press the“Play”button once to start picture display with the first picture in the current sub-folder

or

•Press the “OK” button once to start picture display with the currently selected picture in the current sub-folder.

Programmed picture display (Program)

If you have set “Program Begin” mode to select several pic- tures for programmed picture display:

1The“Program _:_”field is faded in above the CD-R menu. Select the first picture that is to be programmed with the control buttons and on the remote control.

If there are folders: Only one picture at a time from the current sub-folder can be selected for programmed pic- ture display. Pictures from different sub-folders cannot be selected for programmed picture display.

2Confirm selection by pressing the “OK” button on the remote control once.

3The selected picture is then displayed in the faded-in field above the CD-R menu as the first stored picture for programmed picture display, e.g. “Program 1:05” if the fifth picture of the current sub-folder has been selected as the first picture for programmed picture display.

4Repeat steps 1 and 2 until you have selected all required pictures for programmed picture display.

5Press the control button once to change the mode select bar.

6Press the “OK” button once; the “Program End” mode is then displayed in the mode select bar.

7Press the Control button once to return to the CD-R menu.

8Press the“Play”button on the front of the DVD Player or on the remote control once to start programmed picture display.

9Press the “Skip” or “Skip” buttons on the front of the DVD Player within the programmed pictures to jump forward to the next picture or back to the previous pic- ture.

10To cancel programmed picture, press during display the “Stop” button on the front of the DVD Player or on the remote control twice.

 Silvercrest KH 6508/KH 6509