Kompernass KH 6509, KH 6508 Connection via coaxial cable, Connecting via optical cable

Connection via coaxial cable

Proceed as follows to connect the DVD Player to a surround- sound system with a digital coaxial cable …

1Insert the coaxial cable plug into the “COAXIAL” socket on the back of the DVD Player.

2Insert the plug on the other end of the coaxial cable in the corresponding socket of your Dolby Digital or DTS amplifier.

Connecting via optical cable

To connect the DVD-Player to an ausio component by means

of an optical cable...

1Remove the protective plug out of the socket marked „optical“ on the back of the DVD-Players and insert the plug of the optical cable.

2Insert the plug at the other end of the optical cable into the corresponding socket on the audio component.

Note:

Make sure that no dirt can enter into the socket for the optical cable. This could cause signal interference. Always insert the protective plug into the socket if no optical cable is connected.

.. Connecting digital audio-components via analog cable

If the digital audio-component does not have a digital input, then the DVD Player can also be connected via a conventional analog chinch cable.

Proceed in the following manner to connect the DVD Player with analog cables …

1Insert a chinch cable in the…

• “FL“ socket (Front L channel)

• “FR“ socket (Front R channel)

• “SL“ socket (Rear L channel)

• “SR“ socket (Rear R channel)

• “CENTER“ socket (front middle channel) and

• the “SUBWOOFER“ (Bass) socket

…at the back of the DVD Player.

2Connect the chinch cable with the corresponding analog inputs on the digital audio component.

 Silvercrest KH 6508/KH 6509