Kompernass If there are no folders, If there are folders, Silvercrest KH 6508/KH 6509 

tain titles on the CD-R/CD-RW with MP3 or WMA files for playback. You can decide the sequence in which the titles are played.

If there are folders: With this function you can compile your own music programme by selecting certain titles within the current sub-folder for playback. You can decide the sequence in which the titles are played.

➧To operate the “Programmed Playback” function please refer to Chapter “Programmed Playback (Program)”.

Single Track

If there are no folders: The currently selected title is played once again.

If there are folders: The currently selected title in the current sub-folder is played once.

Repeat Single

If there are no folders: Playback of the currently selected title is repeated.

If there are folders: Playback of the currently selected ti- tle in the current sub-folder is continuously repeated until termination by pressing the “Stop” button twice.

To select the Play Modes ….

1In the event that a CD-R/CD-RW with MP3 or WMA files is being played, then playback is terminated by pressing the “Stop” button on the front of the DVD Player or on the remote control once.

2Press the control button once whilst in the list of the titles of a sub-folder (the mark is therefore in the right- hand half of the CD-R menu; see fig. 1). The mark will then change to the mode select bar; the preset “Folder Normal” mode has been selected (see fig. 2).

CD-R MENU

ROOT	..				0
Folder 1				Volume 1 – Title 1	1
		MP
Folder 2			Volume 2 – Title 2		2
		MP
Mode		Folder Normal

Fig. 1

CD-R MENU

ROOT	..		0
Folder 1		Volume 1 – Title 1	1
	MP
Folder 2		Volume 2 – Title 2	2
	MP
Mode	Folder Normal

Fig. 2

3One of the Play Modes is displayed with each depres- sion of the “OK” button. When the required play mode is displayed, then leave the mode select bar by pressing the control button once. The mark is then once again located in the list of the titles of the previously selected sub-folder.

4Proceed as follows to playback titles in the set mode …

If there are no folders:

•Press the “Play” button once to start playback of the first tile on the CD-R/CD-RW

or

•Press the “OK” button once to start playback at the cur- rently selected title.

If there are folders:

•Press the “Play” button once to start playback of the first title in the current sub-folder

or

•Press the “OK” button once to start playback of the cur- rently selected title in the current sub-folder.

Programmed playback (Program)

Set the“Program Begin”mode to select several titles for pro- grammed playback:

1The field“Program __:__“ is faded in above the CD-R menu. Select the first titles to be programmed with the control buttons and on the remote control.

If there are folders: Titles can only be selected for pro- grammed playback from the currently selected sub folder of the CD-R/CD-RW. Titles from different sub-folders can- not be selected for programmed playback.

2Confirm the selected titles by pressing the “OK” button on the remote control.

3The selected title is displayed as the first stored title for programmed playback in the faded-in file above the CD- R menu – e.g. “Program 1:05” if the fifth title of the cur- rently selected sub-folder was selected as the first title for programmed playback.

4Repeat the steps 1 and 2 until all the required titles have been selected for programmed playback.

5Then press the control button once to change the mode select bar.

6Press the “OK” button once; the “Program End” mode is displayed in the mode select bar.

MP3, WMA, DivX and Nero Digital

Silvercrest KH 6508/KH 6509 