Sharp EL-1607P operation manual Conversion KEY, Display Symbols

MEMORY SUBTOTAL RECALL KEY

TAX-INCLUDING KEY

PRE-TAX KEY

PERCENT KEY

NON-ADD/SUBTOTAL KEY:

Non-add – When this key is pressed right after an entry of a number in the Print mode, the entry is printed on the left-hand side with the symbol “#”.

This key is used to print out numbers not subjects to calcula- tion such as code, date, etc.

Subtotal – Used to get subtotal(s) of additions and/or subtractions . When

pressed following the or key, the subtotal is printed with the symbol “◊” and the calculation may be continued.

By pressing this key even in the Non-print mode, the displayed number is printed without any symbol.

CONVERSION KEY:

This key is used:

•to store the conversion rate.

•obtains a value by multiplying a given number with a specified conversion rate.

•to recall the presently stored rate for check.

Press first to clear the calculation register and reset an error condition, then

press . The conversion rate is printed with the symbol “#”.

CONVERSION KEY:

This key is used to obtain a value by dividing a given number with a specified conversion rate.

DISPLAY SYMBOLS:

M : A number has been stored in memory.

–: The display value is negative.

E : Error or overflow of capacity.

• : Appears when a number is in the grand total memory.

*Although all available symbols are shown here for instruction purposes, these symbols will not appear on the screen simultaneously.

6