SOUND

Control the sound volume or switch your sound profile by pressing the VOLUME + or - buttons. Control which sounds play on your phone from the Settings > Sound screen:

Vibrate

Turn this setting on to have your phone vibrate as well as play a sound when

 

signaling a call or new message. If you have ringer, voicemail, or messages set to

 

No sound, then your phone won’t vibrate even when this setting is on.

Ringer

To set the default sound for an incoming call, tap Ringer and choose from the

 

Sound selector.

 

Note: If you’ve assigned a specific sound to a contact, that sound will play rather

 

than the default sound you choose in Sound settings.

Voicemail To set the sound for a new voicemail, tap Voicemail and choose from the Sound selector.

Messages To set the ringtone for a new text or MMS message, tap Messages and choose from the Sound selector.

System sounds Turn this setting on to hear a sound when you:

Touch and hold an item to drag into the Spot - Makes a single water drop sound when item “lifts”.

Drag an item into the Spot - Makes a plunking sound when item lands in the Spot.

Lock your screen - Makes two knocking sounds when locked.

Unlock your screen - Makes a swishing sound when unlocked.

Dial phone numbers using the Dialer - Makes touch-tone DTMF sounds as you touch each number.

Attach/remove phone to USB charger or USB cable connected to computer - Plays four ascending notes when attached; plays four descending notes when removed.

ABOUT YOUR PHONE

You can view the following information about your phone and more from the Settings > About your phone screen:

Your phone number

Version numbers of phone components

35

ONE User Guide - R1.0 - April 21, 2010

Page 35
Image 35
Sharp OMPB10ZU manual Sound, About Your Phone, Vibrate, Ringer