Photo settings

From the Capture photo screen, tap Settings. The Photo Capture settings screen opens, where you can manually adjust these settings:

Resolution

Choose from:

 

Large - Full-size resolution, largest file size and best quality.

 

Medium - A compromise between the best and lowest quality. Good for sending

 

 

and uploading.

 

Small - The smallest file size, but lowest quality. Best for sending and uploading.

 

Note: The currently-set resolution doesn’t display on the capture screen, so if you

 

temporarily change the resolution for a capture session, be sure to change it back.

Mode

Choose from:

 

Auto - Automatically adjusts exposure based on scene.

 

Night - Adjusts the exposure for night lighting.

 

Burst - Raises the shutter speed, turns off the flash, and enables burst capture.

 

 

When you start capture in this mode, the camera will take three successive photos

 

 

without flash and preview the last image captured when finished.

Flash

Choose from:

 

Auto - Flashes when the camera senses the need.

 

Off - Never flashes.

 

Always on - Always flashes, except in Burst mode.

Geotags

Choose from:

 

Quick - The current cellular triangulated location is added to your photo when you

 

 

capture it. No overhead is added to the time to take a photo and your battery life

 

 

won’t be affected significantly.

 

GPS -The current location is determined using the internal GPS and is added to

 

 

your photo when you capture it. With this setting, more battery is used.

Lighting

Choose from:

 

Auto - Automatically senses the ambient light and adjusts.

 

Home - Adjusts to an incandescent light environment.

 

Office - Adjusts to a fluorescent light environment.

 

Sunny - Adjusts to a bright light environment.

 

Cloudy - Adjusts to muted light environment.

85

 

ONE User Guide - R1.0 - April 21, 2010

Page 85
Image 85
Sharp OMPB10ZU manual Photo settings