Sharp PG-C20XE Connecting the Projector, Connecting an amplifier and other audio components

Connecting the Projector

Connecting a video source (DTV decoder or DVD player) using the 15-pin input

1Connect one end of the HD-15/RCA cable or the HD- 15-RGB cable to the COMPUTER INPUT 1 port on the

projector.

2 Connect the other end to the corresponding terminals on the video source.

3 To use the built-in audio system, connect one end of the audio cable to AUDIO INPUT 1 terminal on the projector.

Connect the other end to the audio output terminals on the video source.

•The projector can only accept 480P DTV signals through COMPUTER INPUT 1 terminal. Therefore, set your DTV to RGB monitor output.

•The image quality may become lower depending on DTV signal compatibility.

HD-15/RCA cable (sold separately)

Projector			2 To video output terminals	DTV decoder
RS-232C	INPUT 1	OUTPUT (INPUT 1)		or
AUDIO		AUDIO	HD-15-RGB cable (sold separately)
			COMPUTER

DVD player

2 To video output terminals

Audio cable (sold separately)

3 To audio output terminals

Setup & Connections

Connecting an amplifier and other audio components

1 Connect one end of the audio cable to the AUDIO OUTPUT terminal for INPUT 1 on the projector.

2 Connect the other end to the corresponding terminals on the audio components.

CAUTION

• Always turn off the projector while connecting to audio components, in order to protect both the projector and the components being connected.

• By using external audio components, the volume can be amplified for better sound.

• The AUDIO OUTPUT terminal for INPUT 1 allows you to output audio to audio components from the AUDIO INPUT 1 terminal connected to audiovisual equipment.

Projector

	INPUT 1	OUTPUT (INPUT 1)
O	COMPUTER	AUDIO	COMPUTER
			Audio cable (sold separately)

To audio input terminals

Amplifier

14