Sharp PG-C20XE appendix Remote Control/Mouse Receiver Positioning, Using as a Wireless Mouse

Operating the Wireless Mouse from the Remote Control

Remote Control/Mouse Receiver Positioning

•The remote control can be used to control the projector within the ranges shown below.

•The remote mouse receiver can be used with the remote control to control the mouse functions of a connected computer within the ranges shown below.

•The signal from the remote control can be reflected off a screen for easy operation. However, the effective distance of the signal may differ due to the screen material.

Controlling the Projector			Using the Wireless Mouse
Remote control			Remote control
7 m
30˚			30˚
30˚	45˚		30˚	120˚
			4 m	Remote
		45˚		mouse
				receiver
			30˚
			Remote control

Operation

Effective buttons in MOUSE mode

Remote control

(Front view)

Mouse

MOUSE

RIGHT-CLICK

AV MUTE

Using as a Wireless Mouse

•When MOUSE is pressed, the buttons on the remote control light up and the remote control enters MOUSE mode.

•During MOUSE mode, the cursor can be used as the pointer. MOUSE mode is for about ten seconds while the buttons are lighting.

•When MENU or ENLARGE is pressed, MOUSE mode is released to the normal mode.

•Be sure the supplied remote mouse receiver is connected to your computer.

•The wireless mouse may not operate correctly if your computer serial port is not correctly set up. Refer to the computer’s operation manual for details of setting up/ installing the mouse driver.

•For one-button mouse systems, use either the LEFT-CLICKor RIGHT-CLICKbutton.

Remote control

(Rear view)

LEFT-CLICK

22