Sharp PG-C20XE Picture Adjustments, Description of Adjustment Items, Projector, Remote control

Picture Adjustments

Projector Remote control

You can adjust the projector’s picture to your prefer- ences with the following picture settings.

POWER

ON/OFF LAMP

TEMP.2, 3, 4

Description of Adjustment Items

KEYSTONE

INPUT	AUTO SYNC	2, 3
BACK	ENTER MENU	1, 5

(GUI) On-screen Display

INPUT 1 (RGB) mode

Selected item	ƒ button	∂ button
Contrast	For less contrast	For more contrast
Bright	For less brightness	For more brightness
Red	For weaker red	For stronger red
Blue	For weaker blue	For stronger blue
Reset	All image adjustment items are returned to the factory preset
	settings.
Color	For less colour intensity	For more colour intensity
Tint	Skin tones become purplish	Skin tones become greenish
Sharp	For less sharpness	For more sharpness

•“Color”, “Tint” and “Sharp” do not appear in the INPUT 1 (RGB) mode.

•“Tint” does not appear when receiving “PAL”, “SECAM”, “PAL M”, “PAL N” or “PAL (60 Hz)” in the INPUT 2 (S-VIDEO) or INPUT 3 (VIDEO) mode.

Operation

	INPUT 1 (COMPONENT) mode
		1 Press MENU.
		2 Press ∂/ƒ to select “Picture” in INPUT 1 (RGB)
		mode, or to select “Picture1” or “Picture2” in
		INPUT 1 (COMPONENT), INPUT 2 (S-VIDEO) or
		INPUT 3 (VIDEO) mode, and then press ENTER.
		3 Press ∂/ƒ to select a specific adjustment item,
		and then press ENTER.
		4 Press ∂/ƒ to move the	mark of the selected
		adjustment item to the desired setting.
		5 To exit from the GUI, press MENU.
		• To reset all adjustment items, select “Reset”, and then press
		ENTER.
		• The adjustments can be stored separately in the INPUT 1,
		INPUT 2 and INPUT 3 modes.
INPUT 2 (S-VIDEO) or INPUT 3 (VIDEO) mode

27