4
E
Pen Software modes and how to start the modes
TIPS
• The LL-S and PN-K series do not support the use of a secondary display.
To use a secondary display with the PN-L series, please refer to page 33 of this manual.
• Whiteboard mode and overlay mode cannot be started at the same time.
To change modes, touch the “Select Whiteboard / Overlay Mode” button ( ).
• To prevent the Windows taskbar from moving, lock it.
• Set the screen resolution to 1920 x 1080 (3840 x 2160 for PN-K series) and the screen color to 32 bits.
n Whiteboard mode
You can use the screen as a whiteboard.
The work area is displayed for each “sheet”. By changing the sheet, you can edit data on another screen.
Select Whiteboard /
Overlay Mode
Starting whiteboard mode
Follow the steps below to start the software.
• On the desktop, touch the “Pen Software” shortcut icon ( ) twice quickly (or double-click the icon).
• Click the “Start” button, and then select “All Programs” - “SHARP Pen Software” - “Pen Software”.
• Touch a whiteboard le (a le saved in the SWS format) twice quickly (or double-click the le).
• In Windows 8, launching is also possible from the Start screen and the Apps screen.
n Overlay mode
The board is shown as transparent.
The work area consists of a single screen.
Your drawing will appear on the transparent board placed over the screen, so that you can write comments directly on the items
displayed on the screen. Note, however, that you cannot operate the screen shown behind the transparent board.
Select Whiteboard /
Overlay Mode
Starting overlay mode
Follow the steps below to start the software.
• On the desktop, touch the “Overlay mode Pen Software” shortcut icon ( ) twice quickly (or double-click the icon).
• Click the “Start” button, and then select “All Programs” - “SHARP Pen Software” - “Overlay mode Pen Software”.
• In Windows 8, launching is also possible from the Start screen and the Apps screen.