Sharp PN-R603, PN-R703 operation manual nProduct Specifications

Specifications

nProduct Specifications

Model			PN-R703	PN-R603
LCD component			70" Class [69-1/2 inch (176.6cm)	60" Class [60-1/16 inch (152.5cm)
			diagonal] TFT LCD	diagonal] TFT LCD
Max. resolution		(pixels)	1920 x 1080
Max. colors			Approx. 1.06 billion colors
Pixel pitch			0.802 mm (H) × 0.802 mm (V)	0.692 mm (H) × 0.692 mm (V)
Viewing angle			176° right/left/up/down (contrast ratio ≥ 10)
Screen active area		inch (mm)	60-9/16 x 34-1/16 (1538.9 x 865.6)	52-5/16 x 29-7/16 (1329.1 x 747.6)
Computer input signal			Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω],
			DisplayPort 1.1
Sync signal			Horizontal/vertical separate (TTL: positive/negative), Sync-on-green*1,
			Composite sync (TTL: positive/negative)*1
Video color system			NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play			VESA DDC2B
Power management			VESA DPMS, DVI DMPM
Input terminals	PC/AV		HDMI x 2
			Mini D-sub 15 pin, 3 rows x 1
	PC		DisplayPort x 1
			DVI-I 29 pin (HDCP compatible) x 1
	Audio		3.5 mm mini stereo jack x 2
	Serial (RS-232C)		D-sub 9 pin x 1
Output terminals	PC		DisplayPort x 1
			DVI-D 24 pin (HDCP compatible) x 1
	Audio		3.5 mm mini stereo jack x 1
	Serial (RS-232C)		D-sub 9 pin x 1
LAN terminal			10 BASE-T/100 BASE-TX
Speaker output			10 W + 10 W
Power requirement			AC 100 - 240 V, 3.0 - 1.2 A,	AC 100 - 240 V, 2.3 - 1.0 A,
			50/60 Hz	50/60 Hz
Operating temperature *2			32°F to 104°F (0°C to 40°C)
Operating humidity			20% to 80% (no condensation)
Power consumption			270 W (1.4 W / 1.4 W)	200 W (1.4 W / 1.4 W)
(Input signal waiting mode *3 / standby mode *4)
Dimensions (excluding protrusions)		inch (mm)	Approx. 62-1/8 (W) x 1-9/16 (D) x	Approx. 54-1/4 (W) x 1-9/16 (D) x
			36-1/16 (H) (1578 x 39.4 x 916)	31-1/4 (H) (1378 x 39.4 x 794)
Weight		lbs. (kg)	Approx. 94.8 (43)	Approx. 70.5 (32)

*1 D-Sub input terminal only.

*2 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments.

*3 When AUTO INPUT CHANGE is set to OFF.

*4 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

E56