Sharp PN-R603, PN-R703 operation manual Specifications nPower management, nDDC plug and play

Specifications

nPower management

This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support the same standard in order for the monitor’s power management function to work.

DPMS: Display Power Management Signaling

DPMS	Screen	Power	Hsync	Vsync
		consumption*1
ON STATE	Display	270 W	Yes	Yes
		200 W
STANDBY	No	1.4 W*2	No	Yes
SUSPEND			Yes	No
	display	1.4 W*2
OFF STATE			No	No

DMPM: Digital Monitor Power Management

DMPM	Screen	Power
		consumption*1
Monitor ON	Display	270 W
		200 W
Active OFF	No display	1.4 W*2
		1.4 W*2

*1 Upper value: PN-R703, Lower value: PN-R603. *2 When AUTO INPUT CHANGE is set to OFF.

nDDC (plug and play)

The monitor supports the VESA DDC (Display Data Channel) standard.

DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors.

There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.

E58