Sharp PNL702B Touch Panel Settings, nCalibration Method, nHot Key Setting, Simple, Advanced

Touch Panel Settings

Calibration

Calibration is used to perform position alignment so that the mouse cursor moves to the correct position when the screen is touched.

Caution

•Do not perform calibration in “Tablet PC Settings” in Control Panel. Calibration will not take place correctly.

•When setting the “Simple” on PN-L802B, change the screen size to “Wide” and set the “Advanced” beforehand. When the screen size is “NORMAL” or “Dot by Dot” and the “Advanced” is set before the “Simple”, the mouse cursor may be out of position.

nCalibration Method

Simple

Select the currently displayed screen size (“WIDE”, “NORMAL”, “Dot by Dot”), and calibration takes place automatically. Calibrate using advanced calibration if the mouse cursor is out of position when the touch pen is used.

TIPS

•When a key has been assigned to the “Easy Change” hot key setting, the key can be pressed to successively change a setting.

Advanced

Calibration can be performed manually. Click “OK” to open the settings. Follow the on-screen instructions. (To cancel during calibration, press the [ESC] key on the keyboard.)

When using the PN-L802B, if the position shifts with “4 Points”, adjust using “25 Points”. When adjusting at “25 Points”, use the touch pen. It may not be possible to correctly adjust with your finger.

nHot Key Setting

Hot keys can be set to perform the operations below. The [Ctrl] and [Shift] keys are fixed as hot keys. One of the A to Z or 0 to 9 keys can be selected for the third hot key.

Easy Change	: The calibration method can be changed to “Simple” by pressing the hot key. Settings can be successively
	changed by pressing the hot key.
Calibration	: The hot key can be pressed to open the Select Calibration screen.

5 E