OPERATION OF CONTROL PANEL

OPERATION OF CONTROL PANEL

Your oven can be programmed up to 30 minutes. The cooking (defrosting) time varies from 15 seconds to 5 minutes. It depends on the total length of the cooking (defrosting) time as shown on the table below.

When the oven is plugged in, the POWER LEVEL indicator will show HIGH. If you miss your desired level, press the POWER LEVEL button until you reach the level again.

 

Cooking time

Increasing unit

 

0-1 minute

 

15 seconds

 

1-4 minutes

 

30 seconds

 

4-15 minutes

 

1 minute

 

15-30 minutes

5 minutes

1.

COOKING

 

DEFROSTING

 

 

 

Suppose you want to cook on MED for 10 min.

Suppose you want to defrost 0.5 kg meat.

 

Select desired power

Select DEFROST setting

 

level by pressing the

by pressing the POWER

 

POWER LEVEL button

LEVEL button until the

 

until the POWER LEVEL

POWER LEVEL indicates

 

indicates “MED”.

“DEFROST”.

2. Set the cooking time by

Rotate the LIGHT UP

 

rotating the LIGHT UP

DIAL to the weight of the

 

DIAL.

meat (0.5) as indicated

 

 

on the scale.

The oven starts automatically.

The cooking time is shown by flashing.

3.The cooking time will count down to “0”. When the cooking time reaches “0”, an audible signal will sound and the oven will automatically turn off. If you wish to stop cooking before the end of the cooking time, turn the dial back to “0” or simply open the door.

Everytime the door is opened, microwave activity stops immediately.

NOTE

1.You can set the LIGHT UP DIAL while the POWER LEVEL indicator is lit. The POWER LEVEL indicator will light while the oven door is open. It will also light for 3 minutes after a preceding operation.

2.Your oven is fitted with a safety feature. If the LIGHT UP DIAL remains at the “0” position for more than 3 minutes, you must open the oven door or press the POWER LEVEL button before the dial can be operated again.

3.Your oven will memorize the power level of the last operation. Simply press the POWER LEVEL button and the last power level will be indicated on the control panel. If the elctrical power supply to your oven should be interrupted, the memory will be erased.

4.The scale of the MEAT DEFROST GUIDE is calibrated, refer to the defrosting chart on page 4 in the cooking guides.

To defrost other types of food, select the DEFROST setting and rotate the LIGHT UP DIAL to the required time.

5.The oven door may be opened at any time during the cooking process. If you wish to continue cooking, close the door.

6.If you wish to change the power level or cooking time during operation, press the POWER LEVEL button or turn the LIGHT UP DIAL to the desired setting.

6

Page 7
Image 7
Sharp R-210D operation manual Operation Of Control Panel