R - 5 2 0 L K

R-520LW

MICROWAVE MEASUREMENT PROCEDURE

A. Requirements:

1)Microwave leakage limit (Power density limit): The power density of microwave radiation emitted by a microwave oven should not exceed 1mW/cm2 at any point 5cm or more from the external surface of the oven, measured prior to acquisition by a purchaser, and thereafter (through the useful life of the oven), 5 mW/cm2 at any point 5cm or more from the external surface of the oven.

2)Safety interlock switches:

Primary interlock relay switch shall prevent microwave radiation emission in excess of the requirement as above mentioned. Secondary interlock relay and door sensing switch shall prevent microwave radiation emission in excess of

5 mW/cm2 at any point 5cm or more from the external surface of the oven.

B. Preparation for testing:

Before beginning the actual measurement of leakage, proceed as follows:

1) Make sure that the actual instrument is operating normally as specified in its instruction booklet.

Important:

Survey instruments that comply with the requirement for instrumentation as prescribed by the performance standard for microwave ovens, 21 CFR 1030.10(c)(3)(i), must be used for testing.

2)Place the oven tray in the oven cavity.

3)Place the load of 275±15 ml (9.8 oz) of tap water initially at 20±5O C (68OF) in the center of the oven cavity.

The water container shall be a low form of 600 ml (20 oz) beaker with an inside diameter of approx. 8.5 cm (3-1/2 in.) and made of an electrically nonconductive material such as glass or plastic.

The placing of this standard load in the oven is important not only to protect the oven, but also to insure that any leakage is measured accurately.

4)Set the cooking control on Full Power Cooking Mode.

5)Close the door and select a cook cycle of several minutes. If the water begins to boil before the survey is completed, replace it with 275 ml of cool water.

C. Leakage test:

Closed-door leakage test (microwave measurement):

1)Grasp the probe of the survey instrument and hold it perpendicular to the gap between the door and the body of the oven.

2)Move the probe slowly, not faster than 1 in./sec. (2.5 cm/sec.) along the gap, watching for the maximum indication on the meter.

3)Check for leakage at the door screen, sheet metal seams and other accessible positions where the continuity of the metal has been breached (eg., around the switches, indicator, and vents).

While testing for leakage around the door, pull the door away from the front of the oven as far as is permitted by the closed latch assembly.

4)Measure carefully at the point of highest leakage and make sure that the highest leakage is no greater than 4mW/cm2, and that the primary interlock switch/secondary interlock relay does turn the oven OFF before any door movement.

Page 3 Page 5
Page 4
Image 4
Sharp R-520LW, R-520LK service manual Microwave Measurement Procedure, Requirements, Leakage test
Page 3 Page 5

R-520LK, R-520LW specifications

The Sharp R-520LW and R-520LK are innovative microwave ovens that combine advanced technology with user-friendly features to enhance cooking experiences. Designed with modern kitchens in mind, these models embody efficiency, precision, and versatility.

One of the defining characteristics of both the R-520LW and R-520LK is their powerful 900-watt output, which allows for speedy cooking and reheating. This high wattage ensures that food is cooked evenly and retains its moisture, preventing the common issue of dry or unevenly heated meals. Furthermore, the inclusion of multiple cooking power levels provides users with flexibility, making it easy to select the ideal setting for various types of food.

Both models feature Sharp's signature Inverter Technology. Unlike traditional microwaves that use a turn-on and turn-off cycling method, inverter technology delivers a steady stream of cooking power. This results in more consistent heating, allowing delicate foods such as fish or custards to be cooked perfectly without overcooking the edges. This technology not only enhances the quality of cooked food but also improves the overall efficiency of the microwave.

The R-520LW and R-520LK come equipped with a variety of auto-cook settings that cater to different culinary needs. From popcorn to frozen vegetables, these pre-programmed settings allow users to prepare meals with just a touch of a button, making cooking uncomplicated for all skill levels. The large, user-friendly control panel features intuitive buttons and a digital display, ensuring effortless operation and visibility.

In terms of design, the R-520LW boasts a sleek white finish, while the R-520LK offers a modern black aesthetic. Both models are compact yet spacious, with a generous interior capacity that can accommodate a range of dish sizes. The turntable feature further enhances cooking efficiency by ensuring even cooking all around.

Cleaning and maintaining the R-520LW and R-520LK is a breeze, thanks to their easy-to-wipe surfaces and the interior's cavity that can be easily accessed. The durable construction of these microwaves means they are designed to withstand the rigors of daily use.

In summary, the Sharp R-520LW and R-520LK microwave ovens stand out with their advanced features, such as inverter technology and pre-programmed cooking settings, making them excellent choices for anyone looking to streamline their kitchen tasks. Their stylish designs and user-friendly interfaces further enhance their appeal, making them valuable additions to any modern home.
Top Page Image Contents