R-85ST English 20/01/2005 16:32 Page 8
BEFORE OPERATION
Your oven has an energy save mode.
Plug in the oven. Nothing will appear on the display at this time.
1.Open the door.
The oven display will show “ENERGY SAVE MODE”.
2.Close the door.
The display will show “.0”.
If you set the clock, “energy save mode” does not work. If you keep “energy save mode” go to step 4.
3.Set the clock (See page 9).
4.Heat the oven without food (See page 10).
USING THE STOP KEY
Use the STOP key to:
1.Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3.Cancel a programme during cooking, press the STOP key twice.
ENERGY SAVE MODE
Your oven comes set for the energy save mode. If you do nothing for 2 minutes after a preceding operation, i.e. plugging in or at the end of cooking, the power will go off automatically. To restore power on, open and then close the door. If you set the clock, energy save mode does not work.
To start energy save mode, follow the instructions below.
Example:
To start the energy save mode, (the current time is 23:35):
1. Make sure the | 2. Press the | 3. Press the 1 MIN |
correct time | CLOCK | key once. |
appears on the | SETTING key. |
|
display. |
|
|
4.Press START/+1min key. The power will be off and the display will show nothing.
x1 | x1 | x1 |
|
Display:
8
