25
1. In Standby mode, press and hold .
“
Say a Command
” appears in the display and is
pronounced through the speaker.
2. Say “
Call
”.
VoiceSignal prompts you to “
Say the name or #
”.
3. Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 5 5 5 6 2 0 0."
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “
Did you say?
” followed by the first
number on the list.
4. Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
the list. (For more information, refer to “Choice Lists” on
page104.)
•
To say the name again, press the
Repeat
soft key.
•
To exit Voice Dial without dialing, press .
Pause Dialing From a Contacts Entry
•
If you voice dial a contact that contains (two-second) P pause(s) simply
wait for the pauses to pass and the dialing to complete.
•
If you voice dial a contact that contains (hard) W pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Answering a Call
Your phone notifies you of a call in the following ways:
•
A ring tone sounds and/or your phone vibrates (Your phone provides
seven ring volume settings including:
Silence All
,
Vibrate
,
Low
,
Low/Medium, Medium, Medium/High, or High, and/or
different
ring types to distinguish callers. You can add vibration to any ring
volume setting.)
•
A phone number (unless blocked by the caller) and a name display on
the screen (If the caller’s number and name are stored in your Contacts
list).
•
If the caller can’t be identified,
Call from unavailable#
,
Call from
restricted number
, or no number appears in the display.
•
Your phone continues to notify you of the call until one of the following
events occurs:
–
You answer the call.
–
You ignore the call.
–
You mute the ringer.