Sharp SCH-R850 user manual Call Settings, Alerts, Key Tone, Vibrating Alert, Call Answer

Alerts

You can set your phone to sound an alert whenever you enter or leave your service area, connect or disconnect a call, as well as other options.

1.From the Settings menu, select Sounds Settings ➔ Alerts. The following Alerts options appear in the display:

•Minute Beep — Sounds an alert ten seconds before each elapsed minute of a call.

•Roaming — Sounds an alert when you leave your home service area during a call.

•Call Connect — When you make a call, an alert sounds when the call is answered.

•Power On — Plays a melody when the phone is being turned on.

•Power Off — Plays a melody when the phone is being turned off.

2.Select the desired Alert option setting (On or Off).

3.To save your new alert settings and return to the Sound Settings menu, press the OK soft key.

Key Tone

DTMF Tone Length lets you select the length of the DTMF tones that the device sends when dialing.

1.From the Settings menu, select Sounds Settings ➔ Key Tone. The following options appear in the display:

•Tone Level — Set Key Tone level to High, Medium/High, Medium, Low/Medium, Low, or Silence.

•Tone Length:

–Short — Default setting.

–Long — Select this option if you experience frequent misdialed numbers.

2.To save your new setting and return to the Sound Settings menu, press the OK soft key.

Vibrating Alert

Vibrating Alert lets you set your phone to vibrate in sync with ringtones and melodies your phone plays.

1.From the Settings menu, select Sounds Settings ➔ Vibrating Alert.

2.Select On or Off. You are returned to the Sound Settings menu.

Call Settings

Call Answer

You can select a specific answer mode when you receive an incoming call.

1.From the Settings menu, select Call Settings ➔ Call Answer.

The following call answer settings appear in the display:

113