Change Lock Code

The default lock code for your phone is generally the last four digits of your phone number. It is advisable to change the default lock code to a secret code for security purposes.

1.From The Security sub-menu, select Change Lock Code. You’re prompted to enter the new lock code.

2.Enter the new lock code and press the OK soft key. You’re prompted to re-enter the new lock code for verification.

3.Enter the new lock code again and press the OK soft key. Your new Lock Code is stored.

Note: Your phone does not allow you to view the Lock Code for obvious security reasons. If you change the Lock Code, be sure to write down or memorize the new code.

Emergency #

Your phone provides the option of storing three emergency numbers. Each number can be up to 32 digits in length. All emergency numbers can be manually called at any time, even when your phone is locked or restricted. This can be a useful feature for controlling outgoing calls from your phone.

Note: Emergency number 911 is hard-coded into your phone. You can dial this number any time, even when the phone is locked or restricted. If you call 911 an audible tone is heard and an Emergency prompt appears in the display for the duration of the call.

Important!: Because of various transmission methods, network parameters, and user settings necessary to complete a call from your wireless phone, a connection cannot always be guaranteed. Therefore, emergency calling may not be available on all wireless networks at all times.

Important!: DO NOT depend on this phone as a primary method of calling 911 or for any other essential or emergency communications.

Remember to always turn your phone on and check for adequate signal strength before placing a call.

Store Emergency Numbers

1.From The Security sub-menu, select Emergency #.

2.Select from the three emergency number entries.

3.Enter an emergency number (up to 32 digits in length), then press the Done soft key.

Call Emergency Numbers in Lock Mode

1.In Standby mode, enter the emergency number.

2.Press to place the call.

Emergency Ringback

Emergency Ringback lets you enable or disable the alert tone your phone plays during an Emergency call.

Changing Your Settings

118

Page 121
Image 121
Sharp SCH-R850 user manual Change Lock Code, Emergency #, Emergency Ringback, 118