15
SD-EX220
03/6/19 SD-EX220(U).fm TINSE0560AWZZ
Preparation for Use

- To install the main unit and speakers on the wall -

Installing speakers Notes:

zPlace speakers with the tweeter on the outside. Left and right speakers should
always be positioned symmetrically.
zThere are four VESA (*) screw holes on the back of the main unit and speakers.
You can also use commercially availabl e fi ttings for mounti ng.
zBe sure to install the product according to the method recommended by the
bracket manufacturer.
(*) VESA (Video Electronics Standards Association) is an organization to promote
the standardizat ion of digital imagi ng d evi ce for PCs .
1Fix the pattern pa per and drive two screws into the wall with a d is-
tance of 6-5/16" (160 mm) in between. When mounting vertically,
set the distance to 4-5/16" (110 mm).
2Tighten the sc rews and remove the paper. Hook the speaker on the
screw heads and make sure it is secure.
Put the speaker wire in the groove on the back of the speaker.
Pattern paper
for speaker
(Horizontal position) (Vertical position)
6-5/16" (160 mm)
Pattern paper
for speaker
4-5/16" (110 mm)
(Horizontal position) (Vertical position)
Wall surface Wall surface
Speaker
wire Speaker
wire
(Horizontal position) (Vertical position)
Tweeter
Tweeter Tweeter Tweeter
(Main unit) (Speaker)
2