16
SD-EX220
03/6/19 SD-EX220(U).fm TINSE0560AWZZ
Preparation for Use

- General control -

General control

To turn the power on

Press the ON/STAND-BY button to turn the power on.
If the power does not turn on, check the AC power cord is plugged in properly.
Note:
Do not turn on the power immediately after entering the power stand-by mode. Wait a
while.

To change the display brightne ss (2 levels)

When the power is on, you can switch the display brightness by pressing the DIS-
PLAY button on the remote control.

Volume control

Press the VOLUME (+ or -) button to increase or decrease the volume.

Bass control

Treble control

Surround

Press the SURROUND button to enjoy music that seems to surround you. "SUR-
ROUND" will appear.
To cancel the surround mode, press the SURROUND button again.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
For example, CD function
Dimmer on Dimmer off
1 Press the BASS/TREBLE but ton to select "BASS".
2 Within 3 seconds, press the VOLUME (+ or -) button to adjust the bass.
1 Press the BASS/TREBLE but to n to se lect "TREBLE".
2 Within 3 seconds, press the VOLUME (+ or -) button to adjust the treble.
SURROUND indicator "SURROUND" wil l go out.
21 39 400 .....
+5
-
5
+5
-
5