25
IM-DR580H
03/10/15 IM-DR580H(E)3.fmIM-DR580H(E) TINSE0568AWZZ
Recording
-Recording from a Stereo System, etc.-
To stop recording
Press the button.
Synchro recording is deactivated.
To use the last setting for synchro recording
Press the REC button to pause recording and press the REC
button for 2 seconds or more.
Synchro recording starts.
Recording pause and track numbe ring
!When the stereo system is stopped, the unit will enter the
synchro recording pause mode. When playback is
resumed, the recording will be resumed.
!If a silence lasts for 3 seconds or more, recording will be
paused (pause function does not work for approximately
10 seconds after the recording starts). When the unit
receives sound again, recording automatically starts.
!A new track number is created when the recording
resumes.
When track number setting is active
Tracks are numbered after a silence of more than 3 seconds
and at set intervals (see page 34).
(Example: the interval is 5 minutes)
Note:
Recording may not pause or resume at an appropriate timing
depending on the playback signal. In this case, perform
recording manually (see pages 22 - 23).
7Press the MENU button.
The unit enters the menu select
mode.
8Select "SYNC REC" by press-
ing the or button and
press the ENTER/-USB button.
9Select "ON" by pressing the
or button and press the
ENTER/-USB button.
!"SYNC" will flash.
ON: Synchro recording is active.
OFF: Synchro recording is deac-
tivated.
10Begin playback on the exter-
nal equipment.
Recording will begin automati-
cally.

Flashing

Lit Rotating

Silence of 3 seconds

or more

Silence of 3 seconds

or more

First
track
Second
track
Third
track

Silence of 3 seconds or more

(Track numbering in synchro recording)

Numbered after 5 minutes Numbered after 5 minutes

First
track
Second
track
Third
track

5 min 5 min

3