82
IM-DR580H
03/10/15 IM-DR580H(E)9.fmIM-DR580H(E) TINSE0568AWZZ
References

-Troubleshooting-

Troubleshooting
Many potential "problems" can be resolved by the owner without calling a service technician. If something seems to be wrong
with this product, check the following before calling your authorised SHARP dealer or service centre.
The unit does not turn on.
"Is the AC adaptor disconnected?
"Is the battery exhausted?
"Is the unit in the hold mode?
"Has condensation formed in side the unit?
"Is the unit being influenced by mechanical shock or by
static electricity?
No sound is heard from the earphones.
"Is the volume set too low?
"Are the earphones plugged in?
"Are you trying to play a MiniDisc with data on it instead
of a MiniDisc containing music?
When the operation buttons are pressed, the unit does
not respond.
"Is the unit in the hold mode?
"Is the battery exhausted?
"Is the remote control unit plug or the earphones plug in-
serted firmly?
Some sounds are skipped.
"Is the battery exhausted?
"Is the unit being subjected to excessive vibration?
The MiniDisc cannot be ejected. (The compartment
does not open.)
"Has the track number or character information been
written on the disc yet?
"Is the unit in the recording or editing mode?
"Is the AC adaptor unplugged or did a power failure oc-
cur whilst recording or editing?
Recording and editing are impossible.
"Is the MiniDisc protected against accidental erasure?
"Has the recording level been properly adjusted?
"Is the unit connected properly to the other equipment?
"Is the AC adaptor unplugged or did a power failure oc-
cur whilst recording or editing?
"Is the unit in the hold mode?
"Is the sampling frequency appropriate for recording?
"Is an optical signal being output from the stereo sys-
tem? Read the operation manual for the stereo system.
The battery cannot be charged.
"Is the rechargeable battery in the unit?
"Is the terminal dirty?
Group functions cannot be used with the group-record-
ed MD.
"TOC information may have been changed with other
equipment.
The operation is unstable whilst the PC and the unit are
connected.
"Are you using the USB cable that was purchased sep-
arately?
The display does not show anything or malfunctions.
"Is the PC out of order?
"Are you using another application with this programme
simultaneously?