System connections (continued)
Make sure to unplug the AC power cord before making any connections.
TV
AM loop antenna
Installing the AM loop antenna
<Assembling >
<Attaching to the wall >
wall screws (not supplied)
FM antenna 
Right speaker light-
up wire Right speaker 
Cooling fan
To video input jack
Video cable (not supplied)
subwoofer 
subwoofer
Left speaker
Left speaker 
Red
Black
AC outlet (AC 120 V ~ 60 Hz)
Cooling fan :
The main unit is built with a cooling fan at the rear of the unit for improved cooling. Please do not cover the opening of the fan with any obstacles, as this will block proper ventilation.
Remote control
Battery installation
Use 2 “AAA” size batteries
1Open the battery cover.
2Insert the batteries according to the direction indicated in the battery compartment.
When inserting or removing the batteries, push them toward the
3Close the cover.
Caution:
●Replace all old batteries with new ones at the same time.
●Do not mix old and new batteries.
●Remove the batteries if the unit will not be used for a long period of time. This will prevent potential damage due to battery leakage.
●Do not use rechargeable batteries
●Installing the batteries incorrectly may cause the unit to malfunction.
●Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Notes concerning use:
●Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 “AAA” size batteries
●Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth.
●Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit if this occurs.
●Keep the remote control away from moisture, heat, shock and vibrations.
