Sharp UP-820N manual Stacked report, 208

Stacked report

Your POS terminal is equipped with the stacked report printing function that enables multiple X/Z reports to be printed in sequence by a single request.

Procedure

Select a stacked report no. from the stacked reports list.

The screen continues.

You can select a maximum of twenty reports from the stacked reports list. Some reports can be set their parameters such as “START CODE” and “END CODE.”

•01 DEPARTMENT (Use the numeric entry method) Full department report

Parameter: Start department code/end department code (1 thru 99)

•02 DEPT.IND.GROUP (Use the numeric entry method)

Individual group report on departments

Parameter: Department group no. (1 thru 9)

• 03 DEPT.GROUP TOTAL

Full group total report on departments

•04 MARKDOWN DEPT. (Use the numeric entry method) Markdown for department report

Parameter: Start department code/end department code (1 thru 50)

•05 PLU/UPC (Use the numeric entry method)

PLU report by designated range

Parameter: Start PLU code/end PLU code (1 thru 999999)

•06 PLU BY DEPT (Use the numeric entry method) PLU report by associated departments Parameter: Department code (1 thru 50)

•07 PLU IND. GROUP (Use the numeric entry method) PLU report by individual group

Parameter: PLU group no. (00 thru 99)

•08 PLU GROUP TOTAL

Full group total report on PLUs

•09 PLU STOCK (Use the numeric entry method) PLU stock report

Parameter: Start PLU code/end PLU code (1 thru 99999)

•10 PLU ZERO SALES (Use the selective/numeric entry method) PLU zero sales report

Parameter: 1 ALL/2 BY DEPT.

When “2 BY DEPT.” is selected, enter a department code (1 thru 99).

•11 PLU MINIMUM STOCK (Use the numeric entry method)

PLU minimum stock report

Parameter: Start PLU code/end PLU code (1 thru 99999)

•12 PLU PRICE CATEGORY (Use the numeric entry method) PLU price category report

Parameter: Start unit price/end unit price

— 208 —