Sharp XEA 201, XEA 401 XEA-201and XEA-401reports, X1 Report – Full Sales Report, Z1 Report, Z2 Report, X2 Report

An X report can be run anytime during the day. To run an X1 report which will not reset the sales totals follow the below procedure:

•Put the register in X1/Z1 mode

•Press the CA/AT/NS key

The Z report can be printed daily. This prints the same information as the X report

To run a Z report (with resetting the total)

•Put register in X1/Z1

•Press the •(decimal)CA/AT/NS

The X2 report can be run monthly as a consolidation report. This report also does not reset totals.

To run the X2 report, please follow the below instructions:

•Put register in X2/Z2 mode

•Press the CA/AT/NS key

The Z2 report should be run at the end of the week, month, etc. It will reset the totals.

To run the Z2 report, please follow the below instructions:

•Put register in X2/Z2 mode

•Press the • (decimal)CA/AT/NS key