Logo print

The programming procedure for inputting logo messages on the XEA 201 and 401 is a 2 step process.

1.) The customer must tell the cash register what type of logo message they wish to program.

2.) The customer actually programs the logo message.

Step 1

page 51 of the XEA 201 and XEA-401 manuals

Program the type of logo message format you want. The procedure is as follows:

•Press #/TM/SBTL

•Press 11 (this is the job number)

•Press the @/for key

•Choose the type of logo message (you have 5 choices) They are as follows: 0.) Header 3 line message without graphic logo

1.) Graphic logo only (thank you – here is your receipt)

2.) Footer 3-line message with graphic logo

3.) Header 6-line message

4.) Header 3-line message with graphic logo

5.) Header 3-line message and footer 3-line message

•Press the #/TM/SBTL key

•CA/AT/NS key

Step 2

page 43 of the XEA 201 manual and page 44 in the XEA 401 manual)

•Press #/TM/SBTL key

•Press the 4 key (on the key pad – not department key 4)

•Press the decimal point key (.)

•Select the line that you are programming (1 – 6)

•If you are programming the header your choices are lines 1,2 and 3. If you are programming the footer your line choices are 4,5 and 6.

•Press the @/for key

•Press appropriate keys to get required message (see key layout)

•Press #/TM/SBTL

•(If another line is required select next line here if finished…

•Press CA/AT/NS key

If you reverse these steps you will get an error message. Ex: If you try to program the actual message and you haven’t told the cash register the type of message you will get an error.

8