49
Appendix
Replace the filter holders.
•Align the tabs on the filter holders while
replacing them, and then press down on
the tabs to lock them in place.
4
Replacing the Dust Filters
• If the filters become too dirty to clean
effectively, purchase new ones
(PFILDA025WJZZ) from your nearest Sharp
Authorized Projector Dealer or Service Center.
After removing the filter holders (see
step 2 of “Cleaning the Dust Filters”),
remove the dust filters, then replace with
new ones.
•Pick the dust filters up with your fingers and lift
them out of the filter holders.
•With the reinforcement seal facing down, place
the dust filters underneath the tabs on the filter
holders.
Info Reinforcement seal
•Be sure the filter holders are securely installed.
The power will not turn on unless it is correctly
installed.
Note