41
Useful
Features
Adjusting the Projected Image(“SCR - ADJ” menu)Picture
Resize
Image Shift 0
0
SCR - ADJ PRJ - ADJ Help
Keystone
Auto Keystone
OSD Display
Background
Setup Guide
PRJ Mode
Language
Front
English
On
Logo
On
Off
Normal
SEL./ADJ. ENTER END
8
7
6
5
4
3
2
1
11
11
1 Setting the Resize Mode
•For details of the Resize mode, see pages 32and 33.•You can also press HRESIZE on the remotecontrol to set the resize mode. (See page 32.)Note
22
22
2Adjusting the Image
Position
You can move the projected image vertically.
Q button
•You cannot set this item when “Resize” is setto “Normal”.Note
O button
Menu operation n Page 37
*“Auto Keystone” can be operated only when using XG-MB65X-L or XG-MB55X-L
33
33
3 Keystone Correction
When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted
trapezoidally. The function for correcting trap-
ezoidal distortion is called Keystone Correction.
For Manual Keystone Correction
Set “Auto Keystone” on the “SCR - ADJ”
menu to “Off”, select “Keystone”, and
then adjust with the slide bar.
For Auto Keystone Correction
Set “Auto Keystone” on the “SCR - ADJ”
menu to “On”.
O buttonQ button
Manual Correction
a
When using XG-MB65X-L or XG-MB55X-L
a
When using XR-10X-L or XR-10S-L
Select “Keystone” on the “SCR-ADJ”
menu and adjust with the slide bar.
•The Keystone Correction can be adjusted upto an angle of approximately ±13 degrees(when “Resize” is set to “Normal”).Note