Manuals / Brands / Computer Equipment / Projector / Sharp / Computer Equipment / Projector

Sharp XG-MB55X-L, XG-MB65X-L, XG-MB65X-L, XG-MB55X-L, XR-10X-L, XR-10S-L Adjusting the Projector Function (PRJ - ADJ menu) (Continued)

1 71

Download 71 pages, 3.72 Mb

44

Info

This function prevents unauthorized use of theprojector. Once this function is activated, usersmust enter the correct keycode each time theprojector is turned on. We suggest you recordthe keycode in a safe place where only au-thorized users have access.•If you lose or forget your keycode, contact yournearest Sharp Authorized Projector Dealer orService Center (see page 63). Even if theproduct warranty is valid, the keycode resetwill incur a charge.

Press the 4 buttons on the remote

control or on the projector to en-

ter the preset keycode in “Old

Code”.

•When setting the keycode for the firsttime, press R on the projector for fourtimes.

Setting the System Lock

PRJ - ADJ

Old Code

New Code

Reconfirm

––––

––––

––––

2

•If you input a wrong keycode, the cursorreturns to the first point of the “Old Code”.•The preset keycode is 4 R buttons onthe projector. When you press the R but-ton four times, the keycord input screendisappears.

Note

88

88

8 System Lock Function

Adjusting the Projector Function (“PRJ - ADJ” menu) (Continued)

77

77

7 Fan Mode Setting

Menu operation n Page 37

This function changes the fan rotation speed.

Selectable

items

Normal

High

Description

Suitable for normal environments.

Select this when using the projector at

altitudes of approximately 1,500

meters (4,900 feet) or more.

66

66

6

Selecting the Transmission

Speed (RS-232C)

Make sure that both the projector and computerare set for the same baud rate.

Selectable

items

9600bps

115200bps

Description

Transmission speed is slow.

Transmission speed is rapid.

P

R

99

99

9Checking the Lamp Life

Status

You can confirm the cumulative lamp usage timeand the remaining lamp life (percentage).•It is recommended that the lamp be changedwhen the remaining lamp life becomes 5%.•The lamp life may vary depending on the us-age condition.

Lamp usage condition

Operated exclusively

with Lamp Setting set to

“Eco +Quiet”

Operated exclusively

with Lamp Setting set to

“Bright”

100%

Approx.

3,000

hours

Approx.

2,000

hours

5%

Approx.

150 hours

Approx.

100 hours

Remaining lamp life

Note

“Life”

aSetting/Changing the keycode

When “Fan Mode” is set to “High”, the fan rotation

speeds up, and the fan noise becomes louder.

Select “System Lock”, then press

hENTER or Q.

•The screen for entering the keycodeappears.

1

Contents

Main Page iii iv 1 1. WARRANTY 2. CONSUMER PRODUCT SAFETY ACT WARNING: Introduction See bottom of projector. WARNING: Caution Concerning Lamp Replacement PRODUCT DISPOSAL INFORMATION Declaration of conformity 3 Features How to Read this Operation Manual PP. 61 and 62 For Future Reference Info Buttons used in this operation Contents Preparing Introduction Quick Start Using 5 Reference Appendix IMPORTANT SAFEGUARDS CAUTION: 15. Overloading 16. Object and Liquid Entry 17. Servicing 18. Damage Requiring Service 19. Replacement Parts 8 Observe the following safeguards when setting up your projector. Caution regarding usage of the projector Other connected equipment Using the projector in other countries How to Access the PDF Operation Manuals Accessories Optional accessories Supplied accessories Part Names and Functions Projector Numbers in Z refer to the main pages in this operation manual where the topic is explained. Rear View Part Names and Functions (Continued) 31 46 32 27 27 Numbers in Z refer to the main pages in this operation manual where the topic is explained. 14 Caution Part Names and Functions (Continued) Attach the cover and slide it until it clicks into place. Inserting the Batteries Insert the batteries. Press the P mark on the cover and slide it in the direction of the arrow. Usable Range Quick Start Setup and Projection Quick Start 4. Adjust the projected image with the Setup Guide _P. 27 _P. 31 _P. 28 _P. 30 Setting up the Projector Side View Setting up the Projector Standard Setup (Front Projection) Example of standard setup Projection (PRJ) Mode Indication of the Projection Image Size and Projection Distance Setting up the Projector (Continued) Screen Size and Projection Distance Minimum [L1] Maximum [L2] Picture (Screen) size NORMAL Mode (4:3) Connections INPUT Terminals and Connectable Main Equipment Rear View Samples of Cables for Connection Connecting to a Computer Connecting to Video Equipment When using an S-video cable (INPUT3) When using a 3 RCA (Component) to 15-pin D-sub cable (INPUT1 or INPUT2) When using a composite video cable (INPUT4) Connecting to a Monitor with RGB Input Terminal Controlling the Projector by a Computer Connecting the Power Cord 27 Turning the Projector On/Off R Turning the Power off (Putting the Projector into Standby Mode) Turning the Projector on About the Setup Guide Image Projection Rotate the focus ring to adjust the fo- cus while watching the projected image. 1 FOCUS 3 ZOOM4 ENTER 2 HEIGHT ADJUST Adjusting the Projected Image 3 Adjusting the Height Image Projection (Continued) Adjusting the Volume Displaying the Black Screen and Turning off the Sound Temporarily Switching the Input Mode Select the appropriate input mode for the connected equipment. 3 Press P/Q or O/R to adjust the Keystone Correction. Press g KEYSTONE to enter the Keystone Correction mode. KEYSTONE button Adjustment buttons (P/R/O/Q) RETURN button Image Projection (Continued) XG-MB65X-L/55X-L/ XR-10X-L XR-10S-L Resize Mode 41 VIDEO STRETCH is fixed when 540P, 720P or 1080I signals are entered. Auto Sync (Auto Sync Adjustment) Operating with the Remote Control Freezing a Moving Image Selecting the Picture Mode You can select the appropriate picture mode for the projected image, such as movie or video game. Displaying and Setting the Break Timer Menu Items SEL./ADJ. ENTER END Off On Logo Menu Items (Continued) Projector adjustment (PRJ-ADJ) menu Help menu The items you can set with the Help menu Help menu n Page 46 Using the Menu Screen Menu Selections (Adjustments) Press BMENU. Press Q or O and select Picture to adjust. Using the Menu Screen (Continued) Press P or R and select Bright to adjust. The item displayed by itself The menu screen will disappear. The selected item is highlighted. Picture Adjustment (Picture menu) 1 1 QExample: Picture screen menu for INPUT 1 (RGB) mode QExample: Picture screen menu for INPUT 3 mode 1 1 1 Selecting the Picture Mode Picture Adjustment (Picture menu) (Continued) 2 Adjusting the Image 3Adjusting the Color Temperature Values on CLR Temp are only for general standard purposes. P R Adjusting the Projected Image (SCR - ADJ menu) See page 31 for details of Keystone Correction. a Manual Correction O buttonQ button Adjusting the Projected Image (SCR - ADJ menu) (Continued) 43 Adjusting the Projector Function (PRJ - ADJ menu) 4 1 Auto Search Function 2Auto Sync (Auto Sync Adjustment) 3Auto Power Off Function Adjusting the Projector Function (PRJ - ADJ menu) (Continued) 77 7 Fan Mode Setting This function changes the fan rotation speed. Selecting the Transmission Speed (RS-232C) Make sure that both the projector and computer are set for the same baud rate. Locking the Operation Buttons on the Projector (Keylock Function) Use this function to lock the operation buttons on the projector. a Taking the Keylock off Hold down T ENTER on the projector for about 5 seconds. ROn-screen Display a Locking the Operation Buttons Troubleshooting with the Help menu Utilizing the Help menu func- tions 6 2 Cleaning the lens Maintenance Cleaning the Dust Filters Cleaning and Replacing the Dust Filters Replacing the Dust Filters Info Maintenance Indicators Top View Page Regarding the Lamp Lamp Caution Concerning the Lamp Replacing the Lamp Caution 53 Removing and Installing the Lamp Unit Warning! Disconnect the power cord. Remove the lamp unit cover. Regarding the Lamp (Continued) Remove the lamp unit. Securing screws AC socket Reset the lamp timer after replacing the lamp. Connecting Pin Assignments RS-232C Specifications and Command Settings Computer control O K E R R Return code (0DH) Communication conditions Commands Example: When turning on the projector, make the following setting. RS-232C Specifications and Command Settings (Continued) Page DTV Computer (Hz) VESA Standard XR-10S-L Computer Compatibility Chart XG-MB65X-L/55X-L/ XR-10X-L PC/MAC Signal 480I 480P 540P 576I 576P 720P 1035I 1035I 1080I 1080I Horizontal Frequency (kHz) 15.7 31.5 Troubleshooting Troubleshooting (Continued) For SHARP Assistance Specifications Dimensions Units: inches (mm) Index