Quick Start
This section shows the basic operation (projector connecting with the computer). For details, see the page described below for each step.
Setup and ProjectionIn this section, connection of the projector and the computer is explained using one example.
3
8
6
4
STANDBY/ON button
INPUT button
ENTER button
8
3
STANDBY button
ON button
7 | Adjustment buttons | 7 | KEYSTONE button |
| (P/R/O/Q) |
|
|
7 | KEYSTONE | 4 | ENTER button |
| button |
|
|
|
| 7 | Adjustment buttons |
4 | Focus ring |
| (P/R/O/Q) |
|
| ||
4 | HEIGHT | 6 | INPUT 1 button |
| ADJUST lever |
|
|
1. Place the projector facing a wall or a screen | _P. 18 |
2.Connect the projector to the computer and plug the power cord into the AC socket of the projector
When connecting equipment other than a computer, see | |
_PP. | |
3. Remove the lens cap and turn the projector on | |
On the projector | On the remote control |
| _P. 28 |
16