E-20
Operation
1Press LENS to select mode. Each time LENS is
pressed, the screen changes as shown on the
left.
2Press ENTER to display
test pattern.
3Press /ƒ/ß/© to make
adjustments.
4a. Press LENS until normal
screen appears.
b. To reset the KEYSTONE setting, press UNDO.

Setting up the Screen

Projector
2
3
1, 4a
4b
Digital Image Adjustments

Lens Adjustment

Remote control
On-screen Display
(Example:
16:9 WIDE image)
On-screen Display
(Example:
4:3 NORMAL image)
This function can be used to adjust the focus, zoom
and keystone settings.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
MOUSE
ADJ.
Digital Shift
or
Press .Press ƒ.
Straight lines and the edges of the displayed image may
appear jagged, when adjusting the KEYSTONE setting.
Do not touch the lens when adjusting the focus or zoom.

Digital Shift

When a WIDE or NORMAL (WIDE) image is projected,
this function can be used to shift the image up or down.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
MOUSE
ADJ.
1Press LENS to select DIGITAL SHIFT as shown
on the near left.
2Press ENTER to display test pattern.
3Press /ƒ/ß/© to make adjustments.
4a. Press LENS until normal screen appears.
b. To reset the DIGITAL SHIFT setting, press
UNDO.
This function only works with WIDE and NORMAL (WIDE)
picture display modes during video or DTV input. (See page
36 for details.) The DIGITAL SHIFT screen is not displayed
when projecting images other than WIDE or NORMAL
(WIDE).