E-40
Useful Features
Password
A password can be set by the user and used with the
keylock level to prevent adjustments to certain settings
on the GUI.

Setting the Password

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options”.
3Press ∂/ƒ to select “Password”, and then press
©.
4Enter the new password using ∂/ƒ to select the
desired number, and then press © to select the
next digit. Continue this procedure for the
remaining three digits, and then press ENTER.
5Enter the password again (“Reconfirm”) using ∂/
ƒ/ß/©, and then press ENTER.
6To exit from the GUI, press MENU.
•After setting the password, be sure to write it down in a
secure location so as not to forget it.

Changing the Password

(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Follow steps 1 to 3 in “Setting the Password”
above.
2Enter the old password using ∂/ƒ/ß/©, and then
press ENTER.
3Enter the new password using ∂/ƒ/ß/©, and
then press ENTER.
4Enter the password again (“Reconfirm”) using ∂/
ƒ/ß/©, and then press ENTER.

2, 3,

4, 5

1, 6

Projector Remote control
(GUI) On-screen Display
MOUSE
ADJ.
(GUI) On-screen Display
MOUSE
ADJ.