E-28
Operation
Audio Adjustments

Picture Adjustments

I/P Conversion

This function allows you to select either an interlaced
display or a progressive display of a video signal. The
progressive display projects a smoother video image.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Picture”.
3Press ∂/ƒ to select “I/P Conversion”, and then
press ©.
4Press ∂/ƒ to select “Interlaced” or “Progressive”.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU.

Interlaced mode

Interlaced mode creates a single image through the activation
of scanning lines in two fields. Use this mode when projecting
moving images.

Progressive mode

Progressive mode creates a single image using all available
scanning lines. Use this mode when projecting still images to
avoid flicker and stripes that result from interlaced source still
images.
5
2, 3, 4
1, 6
Projector Remote control
MOUSE
ADJ.
This projector’s audio is factory preset to standard
settings. However, you can adjust it to suit your own
preferences by adjusting the following audio settings.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU. Menu bar and “Picture” menu
screen appear. GUI operation guide is also
displayed.
2Press ß/© to select “Audio”.
3Press ∂/ƒ to select a specific adjustment item.
4Press ß/© to move the mark of the selected
adjustment item to the desired setting.
5To exit from the GUI, press MENU.
•To reset all adjustment items, select “Reset” on the “Audio”
menu screen and press ENTER.
Description of Adjustment Items
2, 3, 4
1, 5
Projector
© buttonß buttonSelected item
2
3
(GUI) On-screen Display
Increased audio from the left
speaker
Increased audio from the right
speaker
For weaker treble
For weaker bass
Treble
Bass
Reset
For stronger treble
For stronger bass
All audio adjustment items are returned to the factory preset
settings.
Balance
MOUSE
ADJ.
Remote control
(GUI) On-screen Display