E-27
Operation
Picture Adjustments
2, 3
1, 4
Projector Remote control Adjusting the Color Temperature
This function can be used to adjust the color
temperature to suit the type of image input to the
projector (video, computer image, TV broadcast, etc.).
Decrease the color temperature to create warmer,
reddish images for natural flesh tones. Increase the color
temperature to create cooler, bluish images for a brighter
picture.
Description of Color Temperature(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU. Menu bar and “Picture” menu
screen appear. GUI operation guide is also
displayed.
2Press ∂/ƒ to select “CLR Temp”.
3Press ß/© to move the mark of the selected
adjustment item to the desired setting.
4To exit from the GUI, press MENU.
(GUI) On-screen Display
5
2, 3, 4
1, 6
Projector
(GUI) On-screen Display
Remote control Selecting the Signal Type
This function allows you to select the input signal type
(COMPUTER/RGB or COMPONENT) for INPUT 1 or 2
port.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Picture”.
3Press ∂/ƒ to select “Signal Type”, and then
press ©.
4Press ∂/ƒ to select “Computer/RGB” or
“Component”.
5Press ENTER to save the setting.
6To exit from the GUI, press MENU.
MOUSE
ADJ.
MOUSE
ADJ.
Increases color temperature for
cooler, bluish, florescent-like
images.
(High color temperature)
Decreases color temperature for
warmer, reddish,
incandescent-like images.
(Low color temperature)
ⳮ3Ⳮ3
(Red) ß button © button (Blue)