Sharp XG-PH70X-N operation manual Specifications, 105

Specifications

Product type	Multimedia Projector
Model	XG-PH70X (standard zoom lens attached)/XG-PH70X-N (no lens attached)
Video system	NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/
	DTV480I/DTV480P/DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I
Display device	0.7" DLP® chip ⋅ 1
	No. of dots: 786,432 dots (1,024 [H] ⋅ 768 [V])
Standard zoom lens	1.2 ⋅ electric zoom/focus lens, F1.8–F2.0, f = 25.6–31.3 mm (standard equipment with XG-PH70X)
Projection lamp	260 W ⋅ 2
Component input (INPUT 1)/	15-pin mini D-sub connector
output (OUTPUT) signal	Y: 1.0 Vp-p, sync negative, 75 Ω terminated
	PB: 0.7 Vp-p, 75 Ω terminated
	PR: 0.7 Vp-p, 75 Ω terminated
Horizontal resolution	750 TV lines (DTV720P)
Component input (INPUT 2)	BNC connector
signal	Y: 1.0 Vp-p, sync negative, 75 Ω terminated
	PB: 0.7 Vp-p, 75 Ω terminated
	PR: 0.7 Vp-p, 75 Ω terminated
RGB input (INPUT 1/2)/output	15-pin mini D-sub connector, 5 BNC connector: RGB separate/composite sync (TTL)/sync
(OUTPUT) signal	on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated
	Horizontal sync. signal: TTL level (positive/negative) or composite sync (Apple only)
	Vertical sync. signal: Same as above
RGB digital input signal (INPUT 3)	DVI connector (24-pin), RGB (digital), 250 –1,000 mV, 50 Ω (Compatible with HDCP)
Video input signal	RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
(INPUT 4)	terminated
S-video input signal	4-pin mini DIN connector
(INPUT 5)	Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated

C(chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated

Audio input signal ø3.5 mm stereo minijack, RCA terminal

0.5Vrms, more than 22 kΩ

Audio output signal ø3.5 mm minijack

(AUDIO OUTPUT 1–5)	0.5 Vrms, less than 2.2 kΩ
RS-232C terminal	9-pin D-sub connector
LAN terminal	8-pin RJ-45 modular connector
Pixel clock	12–230 MHz
Vertical frequency	43–200 Hz
Horizontal frequency	15–126 kHz
Audio output	3.0 W (stereo)
Speaker system	3.3 cm round ⋅ 2
Rated voltage	AC 100–240 V
Input current	6.6 A (AC 100 V)–2.7 A (AC 240 V)
Rated frequency	50/60 Hz
Power consumption	650 W (when “Eco Mode” is “OFF”)/570 W (when “Eco Mode” is “ON”) with AC 100 V
	620 W (when “Eco Mode” is “OFF”)/550 W (when “Eco Mode” is “ON”) with AC 240 V
Power consumption (standby)	0.8 W (AC 100 V) – 1.1 W (AC 240 V) (When “Monitor Out” and “LAN/RS232C” are set to “Disable”.)
Heat dissipation	2,440 BTU/hour (when “Eco Mode” is “OFF”)/2,140 BTU/hour (when “Eco Mode” is “ON”)
	with AC 100 V
	2,330 BTU/hour (when “Eco Mode” is “OFF”)/2,070 BTU/hour (when “Eco Mode” is “ON”)
	with AC 240 V
Operating temperature	41°F to 104°F (+5°C to +40°C)
Storage temperature	–4°F to 140°F (–20°C to +60°C)
Cabinet	Plastic
I/R carrier frequency	38 kHz
Dimensions (approx.)	16 5/32" ⋅ 7 3/32" ⋅ 18 35/64" (410 (W) ⋅ 180 (H) ⋅ 471 (D) mm) (main body only)
	16 5/32" ⋅ 7 37/64" ⋅ 18 35/64" (410 (W) ⋅ 192.1 (H) ⋅ 471 (D) mm) (including adjustment foot
	and projecting parts)
Weight (approx.)	XG-PH70X: 32.9 lbs. (14.9 kg)
	XG-PH70X-N: 30.3 lbs. (13.7 kg)
Replacement parts	Remote control, Power cord for U.S., Canada, etc., Power cord for Europe, except U.K.,
	Power cord for U.K., Hong Kong and Singapore, Power cord for Australia, New Zealand and
	Oceania, RGB cable, Remote mouse receiver, Cap for the standard zoom lens, Projector
	manual and technical reference CD-ROM, Operation manual

As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

Appendix

-105