29
XL-HP505
Advanced Features
Note:
To check the timer setting:
Canceling the timer playback or timer recording:
Timer is canceled by turning the power on while in the timer stand-
by mode. The same operation can be performed in the following
procedure without turning the power on.
Reusing the timer:
Using the same setting;
The timer set ting will be memorized once it is entered. To reuse the
same setting, perform the following operations .
Changing the setting;
Turn the power on, and repeat the operat ion from step 1 in "Timer
playback or timer recording".
Note:
The timer can also be set with the remote control.
12When the preset time is reached, playback or recording will
start.
In the timer playback mode, the volume will increase gradually
until it reaches the volume you were listening to before your
system entere d the timer stand-by mode.
13When the ti mer end time is reached, the system wi ll enter
the power stand-by mode automatically.
Once timer:
The timer will be canceled.
Daily timer:
The timer will operate at the same time every day. It will contin-
ue until the daily timer setting is canceled. Cancel the daily timer
when it is not used.
When performing timer playback or recording using another unit con-
nected to the VIDEO/AUX IN jacks, select "VIDEO/AUX" in step 9.
This unit will turn on or enter the power stand-by mode automatically,
however, the connected unit will not turn on or off.
1 In the timer stand-by mode, press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select "ONCE" or
"DAILY", and press the MEMORY/SET button.
3 Within 10 seconds, press the or button to select "ONCE
CAL" or "DAILY CAL", and press the MEMORY/SET button.
The unit returns to the timer stand-by mode after displaying the
setti ngs in order .
1 In the timer stand-by mode, press the CLOCK/ TIMER button.
2 Within 10 seconds, press the or button to select "ONCE" or
"DAILY", and press the MEMORY /SET button.
3 Within 10 seconds, press the or button to select "ONCE
OFF" or "DAILY OFF", and press the MEMORY/SET button.
Timer will be canceled (the setting will not be canceled).
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select "ONCE" or
"DAILY", and press the MEMORY /SET button.
3 Within 10 seconds, press the or button to select "ONCE
ON" or "DAILY ON", and press the MEMORY/SET button.