30
XL-HP505
Advanced Features
Timer and sleep operation (continued)
!Sleep operation
The radio, compact disc and cassette tape can all be turned off
automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY butt on while "SLEE P" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
!To use timer and sleep operation together
You can play back the same source only (the function cannot be
switched).
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback will not be possible.
1Play back the desired sound source.
2Press the CLOCK/TIMER button.
3Within 10 seconds, press the
or button to select
"SLEEP", and press the MEMO-
RY/SET button.
4Press the or button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
"3 hours - 5 minutes 5-minute intervals
"5 minutes - 1 minute 1-minute intervals
5Press the MEMORY/SET but-
ton.
"SLEEP" will appear.
6The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep op-
eration finishes.
1 While "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select "SLEEP
X : XX".
"X : XX" is sleep remaining time.
"The remaining sleep time is displayed for about 10 seconds.
"You can change the remaining sleep time while it is displayed by
pressing the MEMORY/SET button (steps 4 - 5).
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select "SLEEP
OFF", and press the MEMORY/SET button.
1 Set the sleep time (see left, steps 1 - 5).
2 While the sleep timer is set, set the desired playback time
(steps 2 - 10, pages 27 - 28).
Sleep timer setting Timer playback setting
Sleep operation will
automatically stop. Timer playback
start time
1 minute - 3 hours