Sharp XV-Z3000 manual Using the Kensington Lock on the projector

Numbers in Zrefer to the main pages in this oper ation man ual where the topic is explained.

Introduction

STANDBY button	29
For putting the
projector into the
standby mode.
KEYSTONE button	32
For entering the
Keystone Correction
mode.
RETURN button	41
For returning to the
previous menu screen
during menu operations.
AUTO SYNC button	46
For automatically
adjusting images
when connected to a
computer.
RGB/COMP. button	48
For switching to the

respective input signal type.

FREEZE button	38
For freezing images.

Backlight button

For lighting all buttons on the remote control.

28ON button

For turning the power on.

29INPUT 1, 2, 3, 4, 5 and 6 buttons

For switching to the respective input modes.

41MENU button

For displaying adjustment and setting screens.

41Adjustment buttons (P/R/O/Q)

•For selecting menu items.

•For adjusting the Keystone Correction when in the Keystone Correction mode.

41ENTER button

For setting items selected or adjusted on the menu.

36RESIZE button

For switching the screen size (STRETCH, SIDE BAR, etc.).

38PICTURE MODE button

For selecting the appropriate picture.

38IRIS button

For switching “HIGH

BRIGHTNESS MODE”, “MEDIUM MODE” and

“HIGH CONTRAST MODE”.

38IMAGE SHIFT buttons For shifting the projected image vertically.

Using the Kensington Lock on the projector

•This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector.

13